Manufacturer
AMERICAN POWER CONVERSION
Description
Designed for electronics in your home or office, such as computers and related equipment, the Back-UPS BVN650M1 Battery Backup & Surge Protector from APC provides clean battery power when power is interrupted or fluctuates outside of expected levels. In the case of a power outage, it can provide up to 1.9 minutes of runtime at max load and 10 minutes at half load. It also provides an output capacity of 650 VA / 360W, seven total NEMA 5-15R outlets (five battery backup & surge and two surge-only), an input voltage of 120 VAC at 60 Hz 5 Hz using its 5' cord with a NEMA 5-15P plug, and a surge energy rating of 490 joules. Its sealed lead-acid battery is maintenance-free and can be recharged in 6-8 hours. Two of the battery & surge outlets and spaced widely to accommodate larger plugs, and there is also a 2.1A USB Type-A charging port that is MFi certified for smartphones and tablets.To help ensure a long operational life, APC backs this UPS with a limited 3-year repair or replace warranty for the APC unit, a limited 1-year battery warranty, and a limited lifetime $75,000 equipment protection policy.General FeaturesUSB Type-A Charging PortThe USB-A charging port is MFi certified and provides 2.1A for smartphones and tablets.Quick MuteThe Back-UPS is able to temporarily mute user correctable alarms such as On Battery. During such alarms, a short press (less than 2 seconds) of the Power button will temporarily mute the alarm until the condition has been reset. A short double beep will confirm that Quick Mute has been activated. Pressing the Power button for more than 2 seconds will turn off the UPS.Adjustable Voltage SensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Audible AlarmsProvides notification of changing utility power and UPS power conditions.Automatic Self-TestPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery Failure NotificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Cold-Start CapableProvides temporary battery power when the utility power is out.Battery-Protected and Surge-Only OutletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge-only protection for less critical equipmentSurge-Only OutletsProtect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.LED Status DisplayQuickly understand unit and power status with visual indicators.Intelligent Battery ManagementMaximizes battery performance, life, and reliability through intelligent, precision charging.Safety-Agency ApprovedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
